Beta 1


Title Failsafe Control for DTUSat-2
Author Nielsen, Kasper Bjørn
Supervisor Løvengreen, Hans Henrik (Embedded Systems Engineering, Department of Informatics and Mathematical Modeling, Technical University of Denmark, DTU, DK-2800 Kgs. Lyngby, Denmark)
Institution Technical University of Denmark, DTU, DK-2800 Kgs. Lyngby, Denmark
Thesis level Bachelor thesis
Year 2010
Abstract The DTUSat-2 project is a student satellite project at DTU. Any software being run on the satellite could potentially make the satellite unresponsive if a serious error occured. Therefore, a failsafe mode has been developed which should catch theses failures so that the DTUSat-2 sta can investigate errors and prevent them from happening again by uploading new software. To operate the failsafe mode the staff needs both a console tool and a graphical user interface. It is the purpose of this project to investigate possible solutions and produce the software necesarry for the staff to be able to operate the satellite when in failsafe mode.
Imprint Technical University of Denmark (DTU) : Kgs. Lyngby, Denmark
Series IMM-B.Sc.-2010-26
Fulltext
Original PDF bac10_26_net.pdf (1.67 MB)
Admin Creation date: 2010-06-29    Update date: 2010-06-29    Source: dtu    ID: 264257    Original MXD